Questions & Answers for: Toyota valve gasket

...gasket. valve cover gasket leaking You have to remove the spark plugs cables and remove the four nuts that you see when the cables are removed. When the four nuts are removed, simply raise the valuve ...

Ad

Question about 1996 RAV4

1 Answer

Valve cover gasket How do I replace the valve cover gasket on a 1996 RAV4? take off the valve cover and you will see the gasket which you want to replace on its edge.

Ad

Question about 2001 Sienna

1 Answer

valve covers gasket leak oil does anyone have agood ideas of how to replace it? To replace the valve cover gaskets on a Sienna: The front one is easy. The difficult one is the other side, closest to ...

...valve cover gasket I have a 5sfe engine and there are no screws on the valve cover. Can you send a pic of where I should start? remove the gasket by using a scrapper, make sure you have a new gasket, ...

...valve gasket leaks because you can't get enough preload on the bolts to re-seat the old gasket when it gets old and shrinks. The shoulder bolts only allow you to tighten the gasket enough to seat the ...

...valve cover gasket, does the cylinder head gasket have to be changed at the same time. A valve cover does just that, covers the valves on the cylinder head. Barring an extremely unconventional design ...

...valve cover gasket in one of local auto part stores. Don't start the car, put it on parking breaks. If you drove before wait when engine cools down. After then you will need a 10 mm wrench (it can ...

Question about 1992 Camry V6

1 Answer

...valve cover gasket(s) need to be replaced... the gasket you are seeing the leaking from makes the seak between the valve cover and the "head" of the motor... just remove the bolts that hold the cover ...

...valve cover gasket Lose the engine cover,disconnect all the sensors on the valve cover,then lose all the bolt that thighten it the cylinder. Remove the valve cover{gently} and remove the gasket nd ...

...valve covers and gasket. Clean the mating area of the valve cover and cylinder heads well. If necessary, scrape any left gasket from either surface. Apply seal packing to the cylinder heads and place ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1995 Toyota Camry
1995 Toyota Camry

1,828 Questions

1994 Toyota Camry
1994 Toyota Camry

1,753 Questions

1998 Toyota Camry
1998 Toyota Camry

1,565 Questions

2002 Toyota Camry
2002 Toyota Camry

1,303 Questions

1998 Toyota Corolla
1998 Toyota Corolla

1,231 Questions

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...