Questions & Answers for: Chevrolet valve gasket

...valve covers and remove them then scrape off the old gasket and install the new ones and bolt the covers back on. This is a pretty easy job and the gaskets are less than $ 25.00. If it is the oil pan ...

...valve cover gasket 1998 chevy malibu valve cover gasket 1998 chevy malibu The first step is to remove all the parts that are in the way of you being able to remove the valve covers. (Ex.: air intake, ...

gasket. the right(passenger side) valve cover will not go back down onto the pan after replacing the gasket. Gasket is not bunched or poking out anywhere, and there are no obstructions. turn the valve

valve cover gasket off? 1997 chevy cavalier how do i take the valve cover gasket off to replace it? just unbolt it and clean all of the old gasket off and put gasket sealant on the valve cover it self

where do i put the valve cover gasket sealant on the valve cover gasket on 94 chevrolet 1500 silverado Z71 i beleve you would put it on the valve cover it self. some gaskets dont need any sealent.

...gasket the valve cover gasket should be simple enough. 1. Locate the valve cover, and clear the way for it to come out. 2. Loosen the valve cover bolts in an even fashion. 3. clean and scrape the ...

...valve cover gasket. I am assuming you have the 3.1 engine in your venture and Chevrolet was notorious about having faulty valve cover gaskets. However, the replacement gasket is metal and will not ...

...GASKET TO VALVE COVER, AND PLACE IT BACK ON THE HEAD, THEN TIGHTEN THE BOLTS DOWN EASY FROM THE CENTER, OUT TO THE BACK, THEN TO THE FRONT! START THE CAR, AND CHECK FOR LEAKS! IF NONE-U R DONE! GOOD ...

...valve cover gasket problem? Right after oil change, engine check light came on & car started smoking & losing oil. I took out all 4 spark plugs: they were in very bad shape, black, burned, ...

...valve cover gasket on a 2003 Chevy trail blazer Pull off the valve cover, clean it like new, then use a silicone sealer on the valve cover only, place the new gasket on it and let it set-up (around 1 ...