Questions & Answers for: Chrysler Cirrus valve covers

Question about 1999 Cirrus

2 Answers

oil in spark plug hole car missing you need to replace your valve cover gasket and there are rubber rings that go around each spark plug hole they are hardend and leaking oil good luck and please rate

Ad

...down. Check Engine light on, was flashing for a minute now solid. What could we look at first? the valve cover gaskets were leaking oil around the spark plug boots making the boot swell and causing

Ad

My 1995 chrysler cirrus has alot of oil in with the spark plugs, what could cause that? valve cover is leaking hard to replace rear gasket but front one isnt to bad for the rear the plentum has to be ...

my spark plug holes are full of oil what could that be? could it be the valve cover gasket and the o rings in the plug holes yes

Question about 1999 Cirrus

1 Answer

valve cover gasket leak replace gasket.

New Engine oil pours out from under valve cover... When adding change of oil to ''new'' used 1997 Chrysler Cirrus 2.5 V6, it all poured out from under valve cover when engine was turned on! Before ...

can I use gasket sealer on a warped valve cover? you can i guess, use it sparingly and make sure the mating areas are spotless,

Question about 1995 Cirrus

2 Answers

...I find the distributor and follow the wires but all I see are black things that go into the valve cover but I don't see any plugs. Thanks. Marlen there are no spark plugs with fuel ...

...found to do this (if you want to call it EASY) is to remove the upper intake plenum and the rear valve cover.  Then the bolt can be easilly accessed by reaching over the top of the rear ...

Question about 2000 Cirrus

1 Answer

spark plug location The spark plugs are located in the holes on the valve cover. If this is a v6 engine you will need to remove the plenum to remove the rear bank spark plugs.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...