Questions & Answers for: Lexus valve covers

...Whats the cause of finding oil on & in the plugs & on top of the pistons? I was told it's the valve cover gaskets but theres no sighns of leaks? Who ever told you it was the Valve cover gaskets ...

Valve cover and Oil pan bolt torque I'm replacing oil pan gasket and valve cover gasket, looking for torque on bolts for both. Also any series of tightening order if there is one. Inside to outside ...

...have to remove the intake air plenum to gain access to the firewall side of the engine where the valve cover is located. If you buy a Haynes repair manual for the 92-96 camry, it covers the

...old ones out. every other one was dipped in oil. Im just curiuous what could be the cause ? is my valve cover loose? its your valve cover gasket. they get hot and craked letting oil in.GOOD

spark plugs where are they located on a 1992 lexus es 300 there are 6. 3 are located in front valve cover and 3 are located under upper air intake in the rear valve cover.they can be removed without ...

where is the pcv valve on the 2000 lexus es300? The books says it is in the valve cover but I can't see it? It should be conected to the a valve cover via a short hose.. I have replaced the PCV valve ...

valve cover gasket leak on 95 lexus es300. how do i fix Take the valve cover bolts off then get the new gasket on or use permatex gasket glue than put it back together

how to change valve cover gasket and thermostat on 1992 ES300 the thermostat its located in water out hose near to a/c compressor, to change valve cover, front of engine remove the plastic cover with ...

valve covers Help, I need to replace the valve cover gasket on a 1996 Lexus ES300. It has two broken bolts that need replacing. I plan on drilling out and using an easy-out to get the broken bolts out

What are the torque settings for valve cover bolts on a 2002 Lexus ES 300? 2002 Lexus ES300 Torques settings for valve cover bolts Do the cross pattern....and little by little. Service manual calls ...