...no second gear. 46RH transmission has no second gear. Could it be one of the soleniods on the valve body? Which one? Does it shift into 3rd at the right speed? If 2nd is just missing, try ...
...valve is bad? Any help would be greatly appreciated. Katie.. Are the brake shoes on right, there are two size shoes, One shoe has a longer brake lining then the other. The short brake lining is ...
...going in reverse what could the problem be? Low / Reverse band is likely fried. Remove the pan and valve body, check band adjustment per service manual. Or just pull the trans and rebuild
...at the bottom plate......if its oily, then this is the trick. get engine running, now take the pcv valve out of the right valve cover, now the left valve cover with the oil filler cap you want to ...
5th gear just quit working. If its a stick, Shifter needs adjustment or 5th gear sychronizer is defective. If its an Automatic, shifter, manual shift valve, shift solenoid,5th gear or its circuitry.
...plug, I suggest you do a compression test on this engine, if no compression on that cyl, pull the valve cover on that side and check to see if the rockers got out of place, this engine is famous
...valve lifters adjust themselves and if you hear valve lash or ticking that you don't like, it's not adjustable by the user. One can replace them if they are not working right, but I would just change ...
valve cannot adjust low enough. Your mechanic is lazy. You have to troubleshoot to find the problem--not just change parts. If the valve wasn't working, you would probably have the engine light on--is
adjust it on the back of the lobe when the valve is fully closed. There are charts out there that tell you what the correct adjustment order is, but the way I have been doing it is: Turn the motor to
transmission won't go into 1st gear? band needs adjustment, or valve body or band actuator piston leak. usually a band adjustment fixes that problem.
Usually answered in minutes!
1,788 Questions
417 Questions
197 Questions
173 Questions
143 Questions