Questions & Answers for: Daihatsu Rocky valve adjust

90 rocky check engine light on jump connecter no code flashing bad ecu ? runs rich check the o2 and map sensors Adjust the air and fuel mixture. I have owned a 91 rocky for 16 plus years.

Ad

How do I remove the rear brake drum on the 90 rocky to remove and replace the lug bolts? after removing the wheels, it should just slide off. If you have a ridge on your drums this might not be ...

Ad

...adjust the valve adjustments How do you adjust the valve adjustments on 1992 Daihatus Rocky you need to remove the valve cover and if they are even adjustable there will be locknuts on a stud on one ...

I want to ajust the clutch on my 1994 2.8td daihatsu 4x4 any tips?? the clutch is adjusted a the transmission end, turn the adjustment nut out until u have about 3/4" of free play in the pedal.

engine is surging when its idiling Idle Air Control valve issue possibly. If the car runs good off idle I would inspect for vacuum leaks first. Spray water sparingly and listen for anything getting ...

Question about 1992 Rocky

1 Answer

clutch problems can't chage gear Sounds like it could be just an adjustment problem. If your car has a cable to the clutch it could be stretched enough to not let it disengage enough. Or the other ...

wat is the vale setings for 1999 daihatsu terios manually adjust tappets ,12th inlet and 15 exhaust will do it ,set by the rule of 9 ,no8 down and adjust no1 no7 down adjust no2 and so on so whatever ...

clutch pedal adjustments, clutch adjustments, at times to shift hard there should be an adjustable rod on the pedal under dash will need one or two 12mm spaners loosen lock nut screw the rod out of ...

Question about 1991 Rocky

1 Answer

...times are again shortened to reduce engine speed at idle. Also at idle, the Idle air control valve (IAC) on the throttle opens to allow air to by-pass the closed throttle plate. Check that as ...

i'm trying to adjust the fuel pump timing on a 1988 diahatsu rocky, but it's still blowing smoke. Any idea's? The pump has recently had an overhaul and I was told the two mounting bolts would let me ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...