Questions & Answers for: valet button

Question about 488V LED 2Way Remote

1 Answer

...valet button one time, press and hold the valet button, siren will chirp. While holding the the valet button, press and release the the lock button on the remote. siren should respond with a long ...

Ad

Question about 2000 Intrepid

1 Answer

...valet button is located beneath the steering column. 4 Release the valet/override button after the security indicator light turns off. 5 Turn the ignition switch off. We believe we did that, but not ...

Ad

Question about Keyless Entry Remote Fob Clicker for 2004 Malibu Memory 2 (Mus

1 Answer

...valet push-button is usually located under the driver's side panel, and it must be pressed within 15 seconds of opening the door. The push-button may also be installed underneath the kick panel. 3) ...

...valet button do and where is it situatedin the car The valet button is to the right of the steering column and is quite a large button and has the words 'VALET' clearly written on it. I think ...

Question about Security and Remote Start System (basic install included)

1 Answer

valet push-button is usually located under the driver's side panel, and it must be pressed within 15 seconds of opening the door. The push-button may also be installed underneath the kick panel.3)

Question about Security and Remote Start System (basic install included)

1 Answer

Valet Button in the OUT position. ( It is located on the dash panel left of the steering column)2. Connect the battery - the alarm will sound.3. Put the key in the ignition and turn to the ON position

Question about Excalibur. K9-ECLIPSE 2-Way Keyless Entry & Security System with Proximity

1 Answer

...button valet switch. The switch is about 1/2" in diameter and about 3/8" in height. I can be installed anywhere but it is usually under the dash.In order to activate valet mode, you need to push and ...

Question about Excalibur. K9-ECLIPSE 2-Way Keyless Entry & Security System with Proximity

1 Answer

...the ignition key than press and hold the valet button until the LED illuminated steady. You are now in valet mode. To turn off valet mode, just press and release the valet button with the ignition

Question about Excalibur. K9-ECLIPSE 2-Way Keyless Entry & Security System with Proximity

1 Answer

...of turning the ignition on. The valet button is located beneath the steering column. 4 Release the valet/override button after the security indicator light turns off. 5 Turn the ignition switch

...valet button override button in 2004 dodge durango security system will not allow the vehicle to crank and have been told to press valet button to reset security system? the valet/overide button, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vehicle Parts & Accessories Experts

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Vehicle Parts & Accessories Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...