Questions & Answers for: vacuum mazda tribute

...Mazda dealer. I would reccommend opening your vehicles hood, starting the car and see/hear if you can detect a vacuum leak. Sometimes it can be simple. If not a vacuum leak you might have ecm

...mazda tribute 4 cyl has a vacuum hose loose and we can't find where it goes. Where can we get a vac hose schematic for this or a Ford escape? Take battery and bottom battery holder out.  ...

...Mazda Tribute will start, idle rough for a 2003 Mazda Tribute will start, engine runs idling very rough for a few seconds and then the engine dies. check the fuel filter air filter and vacuume lines ...

mazda tribute 6 cyl engine hissing noise, engine compartment, drivers side, 2 tubes from engine where a sensor was connected but melted off replace vacuum hoses

2002 mazda tribute 3.0 v6 idles good but when put in drive it misses very bad. changed out the spark plugs. You have a very bad vacuum leak. Start checking for cracked , broken hoses. GOOD LUCK FRIEND

What does the vacuum line going through the fire wall hook to under the dash on a 03 mazda tribute v6 engine It goes in and hooks to blower motor inside

...mazda tribute 3.0 LX Detailed vacuum / EGR hose routing diagram Matthew, Vacuum hose diagram should be under hood on a decal/label, on hood it self or on rad cradle usually. Check the attached ...

...Mazda Tribute 3.0? vacuum lines on a 2003 mazda tribute Look for the VECI sticker under the hood, (VECI=vehicle emission control information) it will have a vacuum hose routing diagram. I hope this ...

...vacuum hose on a 2001 Mazda Tribute V6 3.0 connects to the intake manifold. Look for a small vacuum hose coming from the pulse damper and follow it to the intake manifold. The intake manifold is ...

...vacuum hoses on the vehicle please. Question edited for clarity. Question moved to sub category. All are shown in the link. https://www.google.com/search?q=2006+mazda+tribute+vacuum+hose+diagram