Questions & Answers for: vaccum leak

...the vehicle near the cannisters as well as changed the gas cap. Any ideas regarding cause? Thanks, Monty You have a vaccum leak somewhere, try the map sensor vaccum or the EGR Control valve ...

Ad

Question about 1998 Elantra

1 Answer

vaccum leak. Look under your hood for a 1/4 inch black plastic line. It can be hooked into your filter intake housing. Usually this is where the leak is. There also is a black round plastic ball shape

Ad

Question about 2001 Grand Am SE

1 Answer

vaccum leak by pressure testing the system. Most auto parts stores sell a vaccum tester relatively cheap. Or you can take it to a shop and they will pump your sytem full of a uv sensitive die and then

vaccum line in central locking module has a leak that is as well connected with air bag system.I suggest take it to mechanic and check for leaks on vaccum system.If vaccum lines are not leaking, could

Question about 2000 S-10

1 Answer

...I change my defrost switch air to floor heat air, it stays at defrost air. check for a vaccum leak under the hood.check for vaccum at your vaccum tank.a vaccum leak will cause it not to change

Question about 2000 S-10

1 Answer

...vaccum leak or the idle air control valve is acting a fool. I'd start by looking for a vaccum leak. This is easy to do. Take a can of carburetor cleaner and spray it around all the vaccum lines, ...

Question about 2000 S-10

1 Answer

...lx 1.6 Manifold Absolute Pressure/Baro Sensor Range Out of Limits. You have a bad MAP sensor or a vaccume leak going to the sensor. If you can't find a valid leak to the vaccume lines at the

Question about 2001 Durango

1 Answer

how to find a vaccume leak have a vaccume leak, ran low on gas today and it started shaking really bad, it drivable but barely take a  propane torch and turn it on slightly,run it over the ...

vaccum leak/torque converter engine code i have a vaccum leak but my engine light code says a torque converter problem? i have not fixed vaccum leak yet. does anyone think it could hopefully just be ...

Question about 2006 Ram 1500

1 Answer

won't go in 4x4 4x4 will not shift go into gear so what could the problem be Vaccume leak going to the 4x4 actuator. Replace the vaccume line or look for vaccume leaks.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...