...USB cable to connect your modem, try using an ethernet cable and your LAN card instead. It will work better and you won't need modem drivers to make it work. You do however have to have a LAN card or ...
ethernet and usb not working Hi, I can't get my system to recognize that a ethernet cable is plugged in, I had previously tried installing linux on this unit over the network. Perhaps I confused ...
USB to Ethernet adapter for printer I have a printer with usb. Is there an usb-to-ethernet adapter I can use to connect my printer to rounter so that all PCs on network can use this printer? Thanks in
...Ethernet to USB port adapter that will work with a router. You can then assign a fixed IP number to the adapter so that you can find it from any other computer in the network. The adapter would have ...
Question about PSC 2410 All-In-One InkJet Printer
USB outlet, but no ethernet outlet. How can I get an ethernet cable to set up my home ethernet network for convenient printing You can get an Ethernet adapter for HP printers that plugs the USB in one
...usb to ethernet. Check your local computer store. It doesn't support Network Connection. It only has an interface for USB connection. However, you may want to try to set it up with a printserver such ...
...USB, and ethernet (RJ-45). Most likely your previous computer had a parallel port. The simplest solution is to get a USB cable (Male type A to Male type B - 6' or less in length is recommended.) ...
Question about LaserJet 3055 All-In-One Printer
...adapter if you need to plug the other end of the cable into your PC's USB port (e.g. if your PC has only one ethernet port and you're already using it for broadband). Hope that helps a bit. Good
...Ethernet port (RJ-45) Hope this helps. I looked on HP's support page and found out that your printer does not have a wireless adapter built in. The wireless adapter, if it's a usb adapter, won't work ...
Question about Qwest Branded - Centurylink Pk5000z Dsl Modem Wireless Router Buy Dont Rent
usb-to-ethernet connector. I want to print wirelessly from my Mac. What do I need to do, besides attach the adapter to the ethernet port and the other end of the adapter to the printer usb input cable
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions