Question about Aquaracer Quartz Chronograph CAF1112.BA0803
...Unscrew the crown all the way and pull out until it reaches the stop position. Then hold both buttons down until the second hand does a full rotation around the clock face. Now yu can use the top ...
Question about Aquaracer Quartz Chronograph CAF1112.BA0803
unscrew the crown and try pressing the buttons...they'll adjust the hands. Note that there are two adjustment positions when you pull the crown out, so you'll have to figure out which one works. There
crown unscrew (not off) then pull the crown carfully. It will pop once this is for date adjust. Then pull once more and you can now adjust the hands, set accordingly then push crown back in. After you
Question about WAF2110.BA0806 Aquaracer Automatic watch
unscrew the crown to position '1' and wind (which I figured should be clockwise since it gives some resistance in that direction). If thats a new watch then there could be an issue in the movement and
Question about WAF2110.BA0806 Aquaracer Automatic watch
Unscrew the crown, start the stop watch on the time signal. Stop the second hand at 12 o'clock and reset the time (taking out the back lash on the minute hand) Start the watch as the stop watch second
Usually answered in minutes!
56 Questions
5 Questions