...Unscrew the crown pull out the crown to the first position, One click and rotate the crown clockwise. This is for Quick Set models For non quickset unscrew the winding pin until it opens to the first ...
...unscrew the crown lock first by turning the crown toward you, then pull it to position ?3?. Do not forget to screw the crown back ?IN? after all setting is completed. 2. Turn the crown towards you ...
...unscrew the crown lock first by turning the crown toward you, then pull it to position ?3?. Do not forget to screw the crown back ?IN? after all setting is completed. 2. Turn the crown towards you ...
...Unscrew the crown until it pops out, the same way you would unscrew the crown to change the time on the watch. 2)Place the watch case opener in the notches around the outside of the back of the watch ...
...unscrew the crown first and then pull it out? If you have already did it, then there is a problem with setting lever. Usually it happens when the moisture builds up in the watch, resulting parts ...
...then push cronw all the way back to case side..if crown is of the screw down type you will have to unscrew it anti clockwise first then pull it out one click remember to screw it back when you ...
...crown sets date and large dial. Unscrew it (counterclockwise) then pull out to first click, then set date turning crown clockwise, continue to pull out till 3rd click which is where you set the time ...
Question about 98B104 Mens Watch Gold Tone Stainless Steel Marine Star Black Dial Rubber Strap Chronograph
...fitted as its most likely the stem is sheered of inside the old crown if however it has just unscrewed from the stem any good watchmaker should be able to refit it and reseal ...
how do I set a boleva 96B59? it's crown does not come out so How do I set the time and date? check if it has a waterproof screw down crown and unscrew it to set the watch
Usually answered in minutes!
756 Questions
28 Questions
21 Questions
18 Questions
20 Questions