Questions & Answers for: Ingersoll Rand unloading

i have a 5SR EP50SE compressor with an INTELLISYS controller the problem is when the set offline pressure is reached there is no voltage coming out from the controller to trigger the blowdown and the ...

compressor UP6 25 125, runs all the time but is only under load for a short time, should it shut down between loads? This unit will shut down if unloaded for a set period of time. Usually 5 to 10 ...

We have a IR model UP6-25-125 Constantly unloading like it has a stuck solenoid. Any suggestions? Hi rejohnson964... Repair or replace your unloader valve...it is causing your trouble. Please take ...

I got an Ingersol rand Rottary Compressor Model# PX6683U06083 Compressor it releases coolant out of the air intake I belive it was running backwards for a short while now it is rotating the right way,

My company has a Ingersoll Rand air compressor and Intellisys controller 39817655 is installed on it. recently they purchased new controller of smae model but now they are unable to adjust required ...

How do I access the factory settings of INGERSOLL RAND 39817655 Intellisys Controller SSR 15-100 HP? The buttons on this controller are 'LOAD/UNLOAD'; 'SET'; 'DISPLAY SELECT'; 'START'; 'UNLOADED STOP'

I have a problem on SSR ML110...the unit shutsdown with a Low unload Sump Pressure 9kpa display, what causes It trips on low unload sump pressure few minute after starting check electrical connections

Ingersoll rand ssr ep60 60hp,how to reset low unload sump Press the reset button on the controller. If the same alarm keeps coming back when you run the machine, then the machine is probably operating

...lube oil or cooling media is low , this is a safety measure that most machines have (3) the unloading valve is dammged or part of the un load ck is ...

How to change pressure setting on SG Intellisys Controller 3981765 Unable to change offline pressure 103psi and online pressure 93psi on Controller.Please advice the procedure to do so. it is having ...