Questions & Answers for: under hood wiring

Question about 1999 Blazer

1 Answer

...under side of hood.if you ''skin'' the black plastic back you will find a metal wire.now take two pairs of pliers.one to hold the black casing and one to pull the wire.that should open hood.once hood ...

Ad

Question about 1991 Pickup

1 Answer

under the hood. Did not see any wires burned, but the gauges on the inside stopped working. Oil, battery, & tacometer. Look under the dash on the passenger side and under the hood more closely for

Ad

Question about 1001Z 40-Channels Base CB Radio

1 Answer

...under my hood, the only problem is that PA system isnt wired to my CB so i dont get it. My CB is wired for power through the clock/radio acessory fuse under my dash and grounded out on a bolt. It is ...

...under the hood. I had it checked. The problem may be with the wiring under the hood. Inspect first for loose connections or bad wiring under the hood before inspecting the wiring harness at the ...

...of hood. ??? Check under hood for melted wires, sounds like the water pump may have or did fail. This usually will cause overheating. MAKE SURE to see if you have melted wires or parts under the

Question about 1999 Taurus

1 Answer

under the hood broke under the hood and the hood is closed cant get to the hood latch to open it You might have to take out the grill to get at the latch, or cut back the plastic part of the cable and

...cable behind the plastic handle, grip that wire with the pliers and pull till you hear the hood pop, then adjust the cable from under the hood to remain shorter.(it's stretched a bit over time is

...under the hood the latch cable broke off under the hood near or at the spring or coil? is there a way tu open the hood from outside? some have luck with a screw driver from under the front . remove ...

...under the hood fuse box for a 1988 Ford F150? My son bought this and his buddies thought he needed a new fuel pump, when they thought about testing the fuse, they found out there is not a fuse box ...

under the front of the hood. Step 2 Bend the end of the aluminum wire around to create a loop, then tie a knot so that the loop does not come loose. Step 3 Slide the wire through the grill and get the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...