Questions & Answers for: Maytag Neptune unbalanced washer stops during spin

Washer keeps giving me the dc (unbalanced) and uc (can't spin) codes. It seems to **t want to go into spin during the rinse cycle. I have readjusted the load, but ** matter; it does it again and again

Washer keeps giving me the dc (unbalanced) and uc (can't spin) codes. It seems to **t want to go into spin during the rinse cycle. I have readjusted the load, but ** matter; it does it again and again

a loud thumping noise during the spin cycle, the load of clothes has probably gotten unbalanced. Open the lid, redistribute the clothes in the washer, then re-start it. Repeat these steps if necessary

...during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary Hope it may help you; Regards; ...

unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary. also check if something stuck up in spin assembly thanks and please do not forget to accept

...unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary. if still the problem then ,Motor is kicking on and off making that noise....so far for us ...

...unbalanced circuit". Check to make sure that the weight of the clothing is distributed evenly in the tub. There can be a few causes for the generation of this code and you might want to consult an ...

washer does not finish cycle..it stops at spin and it displays a 'dc' code...what is this The Service Manual for reference. Sears Parts Direct for reference. dC code from the Service Manual = ...

...spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if