Questions & Answers for: ultra mixer 2

...ultra power stand mixer leaking oil at the shaft where mixer tools attach. Is there a repair kit which includes a oil seal or something like that at a reasonable price? Hi. Your mixer needs to be ...

...2 quart kitchenaid mixer head jumps when mixing I have adjusted the screw under the head, but it move when mixing. Adjusting the screw didn't work for me the first time I tried it. I was afraid of ...

...to be needed on speed 2, and never for longer than 7 minutes. This is all stated in the Use and Care guide for the mixer itself. If these guidelines are not followed, it may lead to a product

...mixer has about 1/2 inch play and must be lifted in order to put in lock position It sounds like the bar that the head hinges on has come out. It is located on the base and should be flush with the ...

2 springs popped out and I tried to put it back but its not working. How do these pieces go back? It is a KitchenAid stand mixer tilt head model. http://shared.whirlpoolcorp.com/assets/pdfs/literature

...mixer speed control is locked in the off position and wont move. It was working 2 min earlier when it was turned off from a prior mix. You can try moving the lever slightly up or down while moving it ...

...for a second or 2 when I turn it off. The mixer has been wonderful - although is getting quite old. I have probably had it for over 15 years. your control plate is worn out. it will need

...mixer in tape out and phantom button pressed in. Phantom should ONLY be on if using CONDENSER mics or a DI box requiring phantom power... yours should be OFF. cables should be correct. The 2 Trk to ...

My Behringer mixer Eurorack UB802 doesn't work anymore with condenser microphone like Behringer B-1 ,instead it produces a hissing and pop sound please help me to solve my problems. Here's the

...mixer's Tape Out connections (cable needs 2 RCA plugs on one end, 1 3.5mm stereo plug on the other). If the PC only has USB or Firewire connections, you need a computer interface. Something like an ...