Questions & Answers for: Samsung what type of solder

Ad

my keyboard nc10 samsung is not typing anything at all. I am using a wireless keyboard at the moment. Help!! if the key board is not typing at all then its internal key board circuit short.the circuit

Ad

Question about SyncMaster 204B 20.1" LCD Monitor

1 Answer

...TYPE , A set of yewelry screwdrivers. Open monitor and do a visual check around the power supply, specially around the transformer , and check for a burnt or a cold solder , just resolder it , and ...

Ad

Question about LN-S3251D 32 in. LCD HDTV

1 Answer

...type ex 1000mf electrolytic but you will want to go higher with its voltage rating ex if it is 10v go higher like 25v if you can find it.You will need a soldering iron, solder wick to remove solder ...

Question about LN-S3251D 32 in. LCD HDTV

1 Answer

...solder. Make sure to use correct type of caps, they must be low ESR type, not just any generic electrolytic caps from RADIO SHACK. Basic LCD monitor and TV troubleshooting guide: ...

Question about SyncMaster 753S 17" CRT Monitor

1 Answer

solder bridge in between adjecent terminals. Loose solerings in circuit may also make this type of fault. If it doesn' help you, just repalce all of the electrolytic capacitors on that side first.

Question about SyncMaster 753S 17" CRT Monitor

1 Answer

solder, if not, reflow those with a soldering iron as well. If there is voltage there, start by replacing the electrolytic capacitors in the inverter section.  These will be values like 1, 2

...solder. Visit the site refered here, and surf though. you might get details from here, I'm sure.For more details type in this site name “Electro-help” (DO NOT copy and paste the site name ...

Question about TXN3245FP 32" TV

1 Answer

...type of fault can occur. Unplug it once and re-plug it. Check the solder terminals to this socket at solder side of the board for any loose soldering. If found suspected, re-solder it. There will be ...

un60h6300afxza Samsung needs the led strips replaced. Is this too involved for me? I can buy 14 strips for $79 at Shopjimmy. Any recommendations? Unless you have experience soldering PCBs, I would say

...bulging CAPS and no visible sign of damage to the PS board. The main fuse (5.0AH/250V) is a ceramic type, soldered directly onto the board. With my meter, the fuse shows OPEN (no resistance or ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Samsung Computer and Internet Experts

Ekse

Level 3 Expert

13434 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

asber

Level 3 Expert

296 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...