Questions & Answers for: Midland what type of solder

Ad

Question about 1001Z 40-Channels Base CB Radio

1 Answer

cb not working The weather station works great however I get nothing from the CB side. Squelch has no effect no sound at all. Probably cold solder joints on the stand up if boards. Good Luck Ed NC ...

Ad

Question about 1001Z 40-Channels Base CB Radio

1 Answer

Horrible Noise I have recently developed a horrible screeching in my radio. It is not affected by the volume of the unit, and is only heard if the radio recieves another broadcast or if the squelch is

Ad

Question about 79-290 120-Channels Base CB Radio

1 Answer

wont change channels I have a midland 79-290 the unit powers up and receives and seems to transmit, but it is stuck on channel 9 and none of the functions seem to work Thanks for the help First, try ...

Question about Amateur&Consumer Radio Replacement Batteries: 70B-75.....1400 mAh 7.2V NiCD

1 Answer

uniden hr2510 10 meter lights up, won't transmit or receive Have you tried a different michrophone. If you have then the radio will have either a cold solder joint on the main board or a transister ...

Question about 1001Z 40-Channels Base CB Radio

1 Answer

i am useing a em27 with power pack in my home and receiveing is all crackly but when use my other cb not connected to power pack everything is fine, please help There is probably a loose ground wire ...

Question about 75-785 Handheld CB Radio

1 Answer

wires in place around switch or reheat them. Cold solder joints sometimes cause this. Solder pencil types are sold at Radio Shack

Question about 1001Z 40-Channels Base CB Radio

1 Answer

I have a Midland 1001Z 40-Channels Base CB Radio and a Magnetic-mount CB antenna. 29" stainless steel whip and 6" spring. About 46" high overall. All bought from /www.thesource.ca in ...

i cannot get my mic to work right on my 77-099 if i turn the squelch down i dont hear anything but if i hold the plug up i can. I was wondering if i need a new mic or is it something with the cb? ...

no sound through the speaker. when you try to key it up, sound comes out of the hand microphone Try a different microphone. Could have a broken /frayed wire touching on the inside at the mic plug. or ...

when i keyup my d104 mic on cober 148 gtl ihear feedback squeal.but the d104 work good cobera 2000 gtl try to keep the mic away from the radio speaker.check to see if its turned up to high.check your ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Midland Radio Communication Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Gene Pitts

Level 2 Expert

159 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Midland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...