Questions & Answers for: twist grip Cars & Trucks

...twist counter clockwise. The bulb/socket assembly should pop out when it hits the right spot. I have often found that the sockets are hard to get a grip on and hard to turn and recommend using a ...

Ad

...How to fix? Any concerns with Air Bag system? 2004 Toyota Sienna- Driver's seat belt jammed and twisted. Dealership can not fix. Want me to replace the whole seat belt device for $500! There are ...

Ad

...Ford Focus Can't grip installed bulb base firmly enough to twist bayonet mount free. common problem,the base gets corroded to the fitting,once the glass has broken,use pliers to twist and pull

Question about 1997 Sunfire

1 Answer

twist it a lot to get it in. I use one vice grip to hold it, then I clamp the other one back to give me room to rotate. I take the other one loose and rotate, then hook the other one further back, and

on a 2000 ford mustang v6 do u compress or twist the piston on the brake caliper if the caliper cup has slots in it it has to turn but I would say on a mustang it would just compress with some c-clamp

Question about 2000 Mustang

1 Answer

...Use it as a Grip and not CRUSH THE CAP when you twist. If the plastic it brittle and it breaks, you may have to use a hammer and chisel and remember LEFTY LOOSY, RIGHTY TIGHTY GO COUNTER ...

Question about 1989 Delta 88

1 Answer

...locking onto pully with vice grips; they fail to stop it from turning. Thanks.... use a chain and twist it around the pulley then twist the ends together put a bolt through both ends and fasten it ...

twist anti-clockwise or clockwise to open? to open turn the cap counter clockwise. the rubber seal under the cap may be sticking. if you have a pair of adjustable pliers use these to get a better grip

...the front. Swing up the ring grip on it and twist. It should be a quarter turn to unlock. To actually remove the battery you might have to remove the seat cushion and lift the battery up and

How do you remove a broken dipstick tube from 1.8nissan pulsar engine If it's broken off even with the block, you need to drive an "easy out" screw extractor into it and grab the easy out with a pair ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...