...results in loss of channel memory Every time the TV is unplugged, all the the channels need to be reset. It's a friends TV and that all he told me. How long is it unplugged for before it
tv. My wife tried unplugging the tv for a minute or two, but we still had the same problem. I unplugged the tv and left it unplugged for over 8 hours, then plugged it back in and the problem was fixed
Question about 57F500 57" Rear Projection HDTV-Ready Television
...tv must be unplugged. recently warner cable reprogrammed their hd-tuner to improve reception and now my tv will not power down. the power on button will bring up the magic-focus routine everytime you ...
Question about 57F500 57" Rear Projection HDTV-Ready Television
...it started working fine did you unplug tv from the wall or from the surge protector. Make sure tv is unplugged from the wall and let it sit for a minute or so then plug directly into the wall
Question about R52WM24 52" HDTV Projection Television
...TV for 60 seconds and while unplugged check tosee if the DISH logo can still be seen, if you still see the logo after boththe TV and receiver are unplugged there is an issue with the Television
Question about 60V500 60" Rear Projection HDTV-Ready Television
...BLUE LIGHT. check the projectors lamp.look like to need replace 1- unplug everything from your tv[all cords, cables]and unplug tv from the outlet.....make sure tv is OFF before unplug! wait 5
...TV. I unplugged both HDMI cables. I unplugged the two devices connected with HDMI. I plugged the TV directly into the wall. I turned on the TV. It worked. She then instructed me to power up the HDMI ...
...TV is still unplugged. Then plug in the TV and turn it back on. Similarly, power cycle the TV: turn it off, unplug it and leave unplugged for a couple minutes. Plug it back in and power it on. Reset ...
Question about NS-LDVD19Q-10A LCD TV
...unplugged for 1 minute and plug it back in. Cycle the Box: -The box will reset after unplugging. -Turn TV back on. -Allow a few minutes to complete the reset cycle. -Once cycled check to make sure ...
...TV from outlet in the wall and then leave it unplugged for about at least 2 minutes. With it still being unplugged press and hold the power button on the TV itself for about 30 seconds to drain all ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions