Questions & Answers for: Samsung HL tv turns on but no picture

...tv turns off. Help! My shop had this problem yesterday. We had to change the DMD to correct it. One of the data lines was being drawn down intermitently. This doesn't eliminate the digital PCB, but, ...

...tv on the picture will only be there for about 3 mins and then it goes black but i still hear sound. The problem with that now is that i can't turn tv off(i press power on tv and remote and won't go ...

...TV IS ONLY 3 YEARS OLD. HELP?????? I have the same problem... It turns B&W I can still hear the sound... however I can still turn the tv off when that happens got mine working better unplugged the ...

TV turns itself off after a few seconds, no picture at all When I press the power button, I hear the TV turn on. What I here is like a relay click, no sound or picture from the TV itself. It will shut

tv turns off and on have picture and sound after a few min lose picture still have sound also no vol and mute function, tv will not turn off with remote or main on/off button have to unplug from wall.

TV has motor sound and no picture. I replaced the bad lamp with the correct one. Turned on and it worked great. Turned off for 15 mins. When I turned it back on I get a motor type sound and no picture

...tv it will start up but never gets a picture on the screen. It eventually turns itself back off & all 3 of the lights flash on the front of the tv. Three blinking LEDs mean lamp may be defective ...

tv picture keeps turning off hello! i have a samsung projection tv - and the picture went out yesterday. i unplugged the tv for a while then turned it back on ... it worked for about 5 minutes, then ...

...for more than 8 hours and TV picture still wont come on. IF IT SHUTS DOWN TO STANDBY, THEN DIGITAL BAORD IS BAD, IF IT JUST KEEPS CYCLING ON/OFF THEN YOU NEED A POWER SUPPLY, BALLAST AND PROBABLY ...

tv and showed picture with sound lasting 15-second. Then TV automatically turned off and three LED lights blinked. I can not turned off TV with remote control. The only way is turning off power strip.