Questions & Answers for: Mitsubishi tv convergence images

...convergence board to the 'good' TV the blue is now doing what all the colors are doing on the 'bad' TV. The red crosshair moves but not the blue. I am assuming that the problem lies somewhere on the ...

...TV menu and select Convergence if Auto it will do it when you select this. If not it will ask you to do "Multi-Point Convergence" which will bring up a huge grid on your screen. You must use the TV ...

convergence issue I have a 55-in mitsubishi projection TV. Occassionally, a double image appears of all letters, etc. I go into the advanced feature mode into convergence mode to reset and it seems to

...convergence menu. The TV is 6+ years old. Is it worth repairing? Local techs want $125 to diagnose. Been repaired once for some other problem back in 2006. No,need to diagnose.It a 100% convergence ...

tv convergence are dead.U know how to solders?Must replaced the 2 STK convergence ICS,some or all it resistors.Tries Websites Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it

...Tv have a problems known as the convergence problems,it dead.The tv convergencce board require changing 2 STK convergence ICS and some or all it resistors to solved the convergence problems.The shop ...

tv convergence board are dead.These parts on the tv convergence board must have it 2 STK convergence ICS and some or all it resistors replaced,to solved convergence problem.U know basic soldering,have

...tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the convergence board,require replacing to fix the tv picture convergence problems.The shop,will ...

...tv convergence board have dead 2 STK convergence ICS and some or all it resistors too.By replacing all these parts on the tv convergence board to fixed it to solved the tv pictures convergence ...

tv convergence board that was replaced for ur tv.The 2 STK convergence ICS was old it is not new it is those 2 STK convergence ICS on the tv convegence board is dead again and some of the resistors on