Question about DTQ-25S2FC 25" TV
push the power button Power light does not come on, no picture . Only sound it makes is when I push the power button and that is a clicking noise. When I stop pushing the power button no more clicking
...power to prevent any fouther damage, when you un plug it the TV resets and it will turn on agian. I have the same TV Check the CRT light guns there are 3 of them. If one goes bad it will cause your ...
TV won't power up, relay clicks twice When power button is pushed, there is the normal relay click as it tries to power up. Almost immediately, there's a 2nd click and it powers down. I've been trying
push power button. TV set click's on and off when push power button as if a bad relay, etc. Hi! your unit has trouble on the power supply or its near by circuit that is why it shuts off for protection
Question about FD Trinitron WEGA KV-36FS120 36" TV
...No picture, click as if the tv wishes to come on, but doesn't. The red LCD light blinks 4 times. Clicks, power surge and no picture. I had just move the TV locations, worked before, not now. ...
Question about UltraVision 42HDS52 42 in. HD-Ready Plasma Television
...push wait like a 1 mins or 2 mins for the tv Tuner signal board to take it effect.This process should get ur tv picture back,because the tv Tuner signal board it is old and having problems,evenually ...
Question about UltraVision 42HDS52 42 in. HD-Ready Plasma Television
tv power light stays red and if i push power it will make a feint click but wont come on, then ill have to unplug it and wait 5 mins to get it to click again when pushing power.i took the back off tv,
Question about PN63B550 63 inch 1080p Plasma HDTV
...TV when pushing power button on remote. Nothing happens when you put finger over power button directly on TV. No relay click that is normally heard when TV powers up either. TV is mounted to wall and ...
Question about 50PK550 50 HDTV Plasma TV
...push either the Input or channel buttons. My LG Plasma 50PK550 is having trouble. I can hear it click on when I click the power button, but I don't see any difference in the screen. If I click any ...
Question about 50PK550 50 HDTV Plasma TV
...clicking the power button and see if the TV powers up. While you are at it, be sure to replace the batteries in your TV remote (if you are using one)... this could be why you cannot power the TV
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions