Questions & Answers for: turntable turns little slow

...little more specific, we might be able to help you out better. Does it slow down, when you do anything, or after a long period of time of being on/used? Or as soon as you turn it on, it slows down? ...

...phono lube (just a little) on the turntable pivots and just one drop of machine oil (sewing?) in the hole in the motor. Don't get any grease on the idler tire or the inner diameter of the

...turntable is running fast. I don't think you need a new motor, generally the deck will run slow if the motor is knackered (or not at all). What you need to do is remove the platter, you will find a ...

...turntable playing too slow, new belt has been put on HELLO Check that your new belt is not too tight as this will slow the motor down as it tries to turn the platter. I would also suggest a little ...

turntable turns very slow very little torque. The belt looks fine, the motor turns, but it is unable to come up to speed, and it is very easy to stop with your finger. Any ideas? I see that there is a

...turns slow. Your turntable is probably belt driven so most likely motor is turning okay but belt is slipping. They are easy to change, first just lift rubber mat on platter and you should be able to ...

...LITTLE SLOW On most turn tables there is a knob or a lever to adjust rotational speed. If it does not seem to have one then the motor is most likely out of sync and would need to be manually

...slow I've had this turntable for about six years. I've recently replaced both the belt and the stylus, but records still sound distorted. Specifically, tempos too slow, vocals too deep, etc. Can tell ...

...turntable isn't turning or turns very slow. When the platter is removed i can see the copper servo wheel turning very slow which doesn't turn the secont middle sized wheel. Is this a belt issue or a ...

Turntable running slow Is a direct drive and is running slow Most of the 'direct drive' turntables have a "pitch control" dial - you turn this dial until the black bars 'stop dancing' and hold still. ...