Questions & Answers for: turntable tone arm wont down

downward force by adjusting the counter weight which is on the back of the tone arm. Rotate it so it's closer to the tone arm fulcrum to increase the weight on the arm, like tightening a nut on a bolt

...tone arm/needle off the record. It is designed with adjustable height to fit any turntable. These are available for sale through Ebay,or please see video to order your own. ...

...turntable is a vestax 2000mkII What is the weight on the stylus? Flip the protective shield down to protect the stylus if available. Tare the tone arm (adjust the counterweight on the back of the arm ...

...turntable manual says it has a fully manual tone arm but i jjust need to clarify if that means that wen i want to play a record the tone arm does not automatically move to the start of the record to ...

Tone arm keeps returning to rest on Crosley CR249 I raise the cue lever and put the tone arm at the starting position. The record starts turning then the tone arm swings back to the rest arm(without ...

...tone arm moves iacross JVC turntable AL-E300BK I have just got this out of storage (yes in my shed!) and I tested the turntable manually and it worked fine. Then I tested the push-button start/stop ...

turntable spins constantly and needle wont go down on record Does the deck have a Lift/Lower lever for the tone arm? Make sure that it is set to the Lower position

...turntable so wa might try to help you On many manual tonearms there is a shaft that goes down the middle of the tone arm base and a set screw keeps it from moving. To adjust arm height locate screw, ...

...tone arm reaches end of record. You will need to get to the underside of the turntable. There you should find that the arm when it gets to the centre of the record it will push on a switch. This ...

...tone arm on your Crosley CR66 turntable won't move, it could be due to a few different issues. Here are a few troubleshooting steps you can try: Check the tone arm: Make sure that the tone arm is not ...