Questions & Answers for: turntable anti skating

turntable anti-skating problem Pulled my turntable out of storage (8 years+-) and now the ant-skating is pulling hard enough on the arm that clicking the cue sends the arm to mid record. I have turned

...turntable, the needle keeps on skating outwards. I tried adjusting the weight and anti-skate but still the same problem. Any suggestions? If you're a real DJ then the Technics is the best TT to ...

skating properly? if so, how do you fix that? Hi the pennies will mess up the stylus. There should be an anti skate setting at the back of the turn table, a round adjustable bit with numbers, increase

record; doesn't engage grooves stylus "skates" across record when turntable is turned on (new at-lp2D-usb turntable, just assembled). Increase the weight of the arm, check if it has anti-skate control

Turntable Hello, I am trying to set the anti - skate and tone arm hight on my turntables what are the proper specs, thanks. Anti skate should be set the same as the weight, i.e 3 gram of weight = 3 on

...turntable, the anti skate spring is busted I think? Need somewhere in Australia, preferably brisbane. The anti skate spring is not part of the arm assy but can be obtained separatly. ...

anti-skating. Play records. Register with http://www.vinylengine.com/ and find the manual here... http://www.vinylengine.com/library/denon/dp-47f.shtml Basically, like almost any other turntable. Look

how do i set the anti-skate on the stanton t62? Where is the anti-skate device on the stanton t62? There is no skate adjustment! The anti skate adjuster is located at the base of the tone arm. (if you

...anti-skating doesn't work properly On the early (pre 2017) versions, the anti-skate spring was too weak. To overcome this issue, you either need to cut off about a third of the existing spring or ...

...anti-skating with an old stylus. That can pull a needle back over and over again around the center of the record. Try setting the anti-skating at 0% and see what happens. Also set your tonearm height ...