Questions & Answers for: Ford F-150 turn on sound

sound in reverse 4 wheel drive I have 1985 F150 8 cyl. 4x4 and lots of snow but roads are still slick. when I turn the wheels too far truck clunks and also when backing up tires chatter and I can hear

turn the key, all I get is a clicking sound. What should I do next? Going to sound like a dumb answer but try removing the spark plugs and then see if it turns, or if water comes out of any plug hole.

...inside the cab when turning the key to that sound made by the solenoid when it moves. Try to turn the engine over with a socket on the crank bolt. If you can turn the engine over, replace the

...sound when turning right only while moving (not while stopped) when I turn the wheel even slightly to the right the sounds happens...it does not make any sound turning left at any speed..the sound ...

sound when turning rightonly while moving (not while stopped) when I turn the wheel even slightly to the right the sounds happens...it does not make any sound turning left at any speed..the sound gets

My motor turns over but won't start and the interior lights for dash radio, lights don't come on. The ignition doesn't seem to turn over far enough to turn on lights but does turn the starter for the ...

...sound. what is the model of your vehicle. Sounds most likely to be a hardware problem in the steering column. remove the steering wheel and you should see (depending on the model) a pin and spring in ...

Dash lights all turn on then off after several minutes, at times a bell starts sounding for a few minutes, then the radio turns off for a few seconds, truck has not stalled. Sounds like a loose ...

...sound is bad. turn to the right and no noise sounds like a winding, grinding noise when steering vehicle to the left on curves at any speed and no noise when steering to the right. I changed left ...

...turn? Replaced struts and shocks at mechanic's advice - did not fix the problem. The noise has progressively gotten worse and almost sounds like a grinding at the same time the clunking is happening. ...