Questions & Answers for: Lexmark turn single

...is Posting a 953 or 954 Service NVRAM Failure Message ID: ENUS9756 To clear an NVRAM error message: Turn the printer off. Leave it powered off for at least a minute to give it a chance to reset, then ...

Ad

Question about T620 Laser Printer

2 Answers

Lexmark T620 Fuser Error 922 fuser error can mean to things #1 the fuse in the low voltage could be blown. #2 the thermal fuse or the lamp are blown in the fuser. looking at the back of the printer ...

Ad

...is go into Setup then Alarms and turn off the alarms setting. The settings are Off, Single(default) and Continuous. You want to change it from Single to Off. Good Luck and Thank You for using

printer jams at paper input on the front tray. printer jams at paper input on the front tray with either single or multiple sheets of paper. I opened it up and didnt see anything in there to keep if ...

Question about T644 Laser Printer

1 Answer

...there is a problem in the software of the machine. You can try resetting the factury defaults. Turn the machine off. Press and hold > , v and V . Turn on the printer. Release the buttons when ...

how do you change "print page setup" from Default: how do you change "print page setup" from Default: Double sided (Duplex) to single sided printint Go to the list of installed printers on ...

My Lexmark T522 with duplexer wrinkles the paper mostly in the middle. It seems only to do it when its duplexing and not single sided printing. I cleaned the feed rollers on the duplexer that I could ...

Question about T620 Laser Printer

1 Answer

turn on from offline 1) Pull out the cartridge and look on the right side of the it. You will see a small hole that has a glass like window in side (round window).2) Turn off MFC-74203) Cover the hole

Question about T640 Laser Printer

1 Answer

...Page.5. Press "check".The message Printing Menus Settings appears on the display.The printer returns to the Ready state after the menu settings page prints.If the menu settings page printed ...

turn when you try to print a test page, then the bevel gear is broken for sure. Visually confirm by opening the left side of the printer, near the front you will see a little mylar square held on by a

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...