Questions & Answers for: Elna turn single

single disc 4. Turn the top selector to "A" 5. Make sure the needle selector is in the centered position. 6. You may now choose any stitch length or width you wish. I usually try "3" for the width and

...single cams where the needle just moves ffrom side to side while the fabric moves forward. And double cams where the needle moves from side to side while the feed dogs move the fabric forward and ...

...single disc stuck in the top. My stitch width is at 0 as well as my stitch length and the selector is on A. Pressing on the knob will not release the disc. Any suggestions? Turn the stitch selector ...

...turn an edge over and it looks like a straight line with a diagonal stitch going to the folded edge at regular intervals like this. Some sewing machines do a similar "overcasting" stitch but it ...

...turn the selection dial to zigzag on my Elna Super I've got a Supermatic manual but I think maybe you mean the earlier model perhaps.  On the supermatic you set the stitch width to 2 and ...

...single or double discs, the doubles give forwards and backwards movement by the feed dogs moving the fabric as well as side to side movement of the needle.  This gives you the "Supermatic" ...

...turn at all for you, when machines are left for long periods any lubrication internally dries up. You can try to rectify yourself if you are patient, need Tri-flow Oil (preferably with a long neck ...