Questions & Answers for: Chrysler turn single

left frount turn single come on bright and flash then die down and gose out no other are affected check the bulb socket for corrosion. check bulb for right resistance value ie: 2057,3157. etc.

left turn single come on flash sevral time then dim down to were you cant see it its the only one the rest work find check the turn sig. flasher also/ try swapping w/the hazard lgts. flasher

I have no turn singles and no 4 ways no power to l/f turn signal 2000 voyager

turn running lights off every thing works fine. I've had this problem before. What I found was a bulb socket which was wired for two filaments and a single filament bulb was plugged in the socket.

...Turn the ignition key to the off position. A single chime will sound to signify that you have successfully completed the programming. It can be reactivated by repeating these steps. The alert will be ...

...turn on see that you don't have the wrong bulb installed; if the socket is for a double filament bulb and you install a single filament bulb (and vice versa) it creates such problems. check the ...

my turn singles and hazared lights stop working Check your fuse box . . it may be as simple as that.

my turn singles and hasared lights stop working my turn singles and hasared lights stoped working Have you checked the fuse?

turn signal flasher located? I don't know - just wanted to mention a trend with modern computerised cars to delete the flasher relay and replace it with a single module that carries out all the timing

...turn the ignition key? NO dash lights and nothing at all from the engine is commonly a flat or bad battery. Dash lights come on but you get a very quiet single 'Click' suggests a bad Starter Relay. ...