Questions & Answers for: turn single Blenders

I am unable to remove the blade, what can I do the blade is a screw fit on the shaft of the blender,, if you only use one blade just rince the blade under the tap and dry it off before putting it away

The coleman rechargable blender not blending The coleman rechargable blender I purchase has been charging for two days and the charge light turns on but it does not blend and only makes a forceful ...

...is caused because the base is not screwed all the way on to the jar. This could be from just not turning it on all the way or it could loosen while running. Make sure the base is tightly closed ...

...it provides enough power to drive the display electronics But not enough to power the relay to turn the motor on. . there are 3 screws under the label. Peel off the label . remove the 3 screw. ...

...the wheel that connects to the motor and locks into the wheel on the bottom of the blade, and thus turns it. e-mail the manufactor maybe they have some. I have a "The Genuine" Moulinex Single speed ...

...Remove the lower screws from inside the blender base.Hold the fan to keep the motor shaft from turning as you unscrew the drive stud. Remove the shield and any washers. Unscrew the fan nut to ...

...is there a way to fix this? Have used this blender before with no problems. This time I turned the power button on then hit the pulse button it did a single spin and the power shut off. ...

single serve ninja cup stuck in base Cup seems to be in a bind and will not turn. I have tried pressing down and turning since it has to go down to go in. I have tried pulling up a bit and turning and

...turn on the blender when you press down on container into base unit. I own and use a ninja blender !. A blinking power button on a Ninja blender indicates that the jar, single serve cup or pitcher is ...