...Turn off power press and hold * and #, turn on power, wait 20 sec and release the buttons. If printer not goes to ready, disconnect power cord when printer initialize and turn off power switch. ...
Question about Laserjet M1319F Laser Multifunction Printer
...turn the power switch on (with the machine still unplugged) and wait 5 seconds, turn the power switch back to off, and the plug the power cord back in and power up the machine. It fixed my "copy ...
Question about Color LaserJet 2600n Printer
...turn on the power and wait for the device to initialize. If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn on the device.You ...
...turn on the power and wait for the device to initialize. If you have recently installed a memory DIMM in the device, turn off the device, remove the memory DIMM, reinstall the DIMM to verify that it ...
...Power Drain: Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet. Press and hold the Power button for 60 seconds. Connect the cable and turn ON the ...
turn on the power and wait for the device to initialize. If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn the device on. Laser
...turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product
...turn offthe power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the ...
...turn on the power and wait for the device to initialize.If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn the device on. ...
Question about LaserJet M1522nf Multifunction Printer (CC372A)
turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on. If
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions