...power light then error light... and so on.. any ideas chaps? An unknown printer error has occurred. Turn the printer off, disconnect the interface cable and turn the printer back on. If error ...
...turn the power off but instead tells the CPU to turn the power off. Obviously, if the CPU is hung up or in a snit, it can't or won't do it. Anyway, one time I hit the button too many times, trying to ...
...printer. 3.) While the printer is off and cables are unplugged., press and hold the on button for 10 sec., release after 10 sec., connect the power cable., turn on the power., check if error
...turn on again. can u please help Is power swit normal? sound "click" when pressed? many posibbilities : power switch, power supply (generally short circuit caused by waste ink), and board damage. If ...
Question about Stylus R290 InkJet Printer
power after i turn off because 2 red light appears while printing the two red lights turn on and stop printing,i press the power to off.. i turn it on so many times but still no power.. in the morning
Question about Stylus 680 InkJet Color Printer
...Turn off the printer and ensure that the print head is at its home location and locked in place as normal; Power off the printer at the wall or by removing the power cable for at least 20 seconds; ...
Question about Stylus Photo R1800 InkJet Printer
...turn off the printer. unplug it from the power source. while its off, open the printer cover, so you could have an access to the inside of the printer, check for any obstruction, paper jam or any ...
Question about Stylus 2200 InkJet Photo Printer
...will initialize, which resets the Waste Ink Pad Counter. 7. Once initialization is complete, turn the printer power off. 8. Reconnect the interface cable. 9. Turn the printer on and print a
Question about Stylus R290 InkJet Printer
...power to off.. i turn it on so many times but still no power.. in the morning, i press the power to on and the 2 red lights appears again, then i turn it off, ..i try to turn it on many times but ...
...1. Press and hold the power button for 5-7 seconds. The printer will turn off. 2. Turn it on again. 3. Test print. It should work. The best fix for this kind of problem is to do the power
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions