Questions & Answers for: Chrysler Concorde turbine speed sensor

Question about 2000 Concorde

1 Answer

...the speed sensors? Yes could be, But at 90% of the fault speed sensor will set code. But if you want to take a chance, They are cheap. Between $20 to $30 on the dealer. and $ 15 to $ 22 on

Ad

...99 LHS not starting and I was told it might be the sensor for the gear shifter I had similar problem and it turned out to be the speed sensor. The good thing is it isnt too expensive. 200 at the

Ad

Question about 1994 Concorde

1 Answer

my car stay in 2 gear wont shift into other gears turbin speed sensor has went bad there are 2 need to take somewere and have computer scanned to see wich one is bad could be both

Question about 2002 Concorde

2 Answers

...speed sensor causing the transmission to go into limp in or default mode due to not recongnizing either vehicle speed or input speed. Rec. replace speed sensors or pull code and properly diagnose ...

...speed sensor by an autozone tech scan of codes but cant find out where its at The VSS vehicle speed sensor is located on the side of your transmission.If you purchase the part and remove it from the ...

...but cant and goes back to the other gear. if u have codes in ecm find the codes most ime is input turbine ...

...of shifting you need to have three sensors checked on the transmission,output sensor,input sensor,and speed sensor, one is not telling the computer your speed,so the computer keeps you in limp ...

Question about 1998 Concorde

2 Answers

...speed sensor it at the tail of thhe transmission the very last one is speed output sensor or vss (vehicle speed sensor) NOT input sensor Thanks for choosing FixYa and welcome to the site. Since your ...

Question about 2000 Concorde

1 Answer

...to the turbine shaft speed (TSS) sensor --circuit malfunction===causes --wiring --TSS--ECM/TCM (TCM is the transmission control module). It all refers to the turbine shaft in the torque ...

...speed sensor located on a 2002 Chrysler Concorde Beware speed sensors seldom fail. Chrysler products transmission have a limp mode where they only shift to second gear when something goes wrong and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...