Questions & Answers for: Plymouth Breeze turbine input shaft speed sensor

Question about 1999 Breeze

1 Answer

speed contol sensor location need to change it but can not find it there are two. an input sensor and an output sensor they are located on driver side of transmission one toward the front and one ...

Ad

...gear. you can put it in park and shut engine off then start engine and transmission will shift. transmission going into limp mode, check speed sensor, and input sensor and output sensors will fix ...

Ad

...speed. On newer engines, the Crank Shaft Position Sensor performs this function. Symptoms: When flashing the Check Engine Light to read codes, code 12 will always display first, indicating the ...

...Input I would replace your cam shaft position sensor. It can cause the car to start hard and run bad if it is bad. Let me know what engine you have and I will be able to tell you where it is

...shaft output speed sensor that is not working. Your car is in limp home mode , and more often than not it is the transmission computer that is dead. It is usualy mounted just behind the radiator on ...

...is fine. The car has over 270,000 miles on it and heads were replaced with just over 100,000 miles on it. Have it scanned anyway at autozone its free INPUT SHAFT SPEED SENSOR... easy

...input speed sensor is the one right below where the two transmission lines attach to the transmission. The output speed sensor looks exactly the same as the input speed sensor. It is just a little ...

...may need to remove the battery as well as the battery tray. Computers may also be in the way. The trans cooler hoses will need to be removed from the teams mission to replace the input speed

Question about 1997 Breeze

1 Answer

...here r your trouble code meanings:1) p0123-throttle position sensor circuit, high input.2)p0117-engine coolant temperature circuit, low input.3)p0118-engine coolant temperature ciurcuit , high

...P0700 and P0715? replaced turbine input speed sensor Hi,po700 is, transmision control system (mil request ) po715 is, turbine/input shaft speed sensor circuit, hope this was some help,all the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...