Questions & Answers for: Mercedes-Benz E-Class turbine input shaft speed sensor

...input shaft speed sensor?turbine shaft (TSS)sensor B no signal.. Now in English it means the speed sensor is either faulty or bad connection,I would suspect the sensor, but worth getting checked by a ...

turning over wont start mercedes e240 turning over wont start not out of fuel censor on crank shaft faulty replaced it starting ok your right,, crank shaft sensor.

Cooling fluid mixed with oil A mercedes C240 from 1999 has cooling fluid in the motor oil. No outside leaks. Not good, or easy fix. Many things can cause this. Hopefully, its a gasket on the intake ...

sensor? http://technoanswers.blogspot.in/2012/02/2009-chevy-impala-accelerator-pedal.html ---------- stalls and bucks on Acceleration? http://technoanswers.blogspot.in/2012/02/nissan-pathfinder-stalls

...turbine speed sensor bad,i changed the conductor plate no change, i found fluid in tcm, cleaned module and harness, still wont shift out of first, replaced tcm with used tcm now the car wont even ...

what does code p2767 means for a cls 500 mercedes benz P2767 input/turbine spped sensor B circuit no signal This is a TRANSMISSION CODE

shaft vibration at low speed most likely universal joints. check that they are tight. if the joints themselves are bad you need to take it to a shop (unless you have the epuipment to press new ones in

...Speed sensor inside the transmission is failed, needs valve body removed and a new 'shift plate' with sensor installed. Hi my w204 c200 mercedes fault code Y3/6n3 speed sensors cmes up...can i flush ...

...shaft and turbine speeds that are needed for shifting. If it is in a limp home mode also known as the fail safe mode, the check engine light will be on and will have a code saying check transmission ...

...Sensor (PRNDL input) Defective Transmission Range Sensor (PRNDL input) wiring or connector Defective Valve Body Defective manual shift valve linkage Dirty transmission fluid that restricts the ...