Questions & Answers for: Lexus turbine input shaft speed sensor

...Input/Turbine Speed Sensor Circuit Malfunction U are going to have to pull the pan off the transmission and check/replace the input shaft turbine speed sensor. Hi, I have P0715 error for my Lexus ...

...shaft speed sensor, sounds like you have a malfunctioning drive shaft speed sensor, change sensor and reset codes and test... e 300 had this problem in 94 and 95 even when they were close to new with ...

...sensor is not the same as the VSC vechilce speed control. You may have two problems. The 02 Sensor should not be more than $75.00 and a half our labor at most. If it is something else it would or ...

...ON A 2001 LEXUS GS300 WHAT IS CODE P0715 ON A 2001 LEXUS GS300 P0715 Input/Turbine Speed Sensor Circuit Malfunction It seems that you may have a problem with your sensor on or in your

input sensor or turbine. Now is the overdrive working yes it is does it feel like it works nope.when you turn on the overdrive and the O/D light is on its only transmission shift quality you only have

...speed, also hesitation what causes this, and check engine light comes on Black smoke is from to much fuel. You may have a bad 02 sensor. Have the codes checked first, even if the light doesn't ...

...speed sensor on the side of the transmission ( I'm not 100% where it's located) that has a plastic gear attached to main shaft in the transmission and it is not making good contact with the ...

...driving no dtc display speed meter working normal pls suggest me what i do my mail adres [email protected] thanks. check also turbine speed sensor on front transmission case ...

VEHICLE SPEED SENSOR LOCATION REMOVE BATTERY REMOVE AIR CLEANER ASSEMBLY DISCONNECT INPUT TURBINE SPEED SENSOR CONNECTOR REMOVE INPUT TURBINE SPEED SENSOR Check attached drawing.

...input turbine speed sensor A. P0715 is detected when TCM or ECM does not receive the proper signal from the sensor. Take a look at any damage to the loom wiring, including connectors before replacing ...