Question about 1986 C1500
im replacing a tumbler on my '85 silverado i got the steering wheel off but how do i remove all the other junk to get to the tumbler? i removed the steering wheel but how do i remove all of the other
...is a threadless part on the end of the bolt that's about an inch long. It goes down against the tumbler and hold it in there. The newer ones are a torx head, but i can't remember if 78 is or not. ...
my key is stuck in the ignition on acc. have to remove power from battery to kill truck. will not turn to off position at all. did chevy have a problem with the pins in there tumblers falling out? ...
...the lock plate behind it, it is spring loaded. then there is a locking screw that holds in the tumbler. remove that and it will slide right ...
...solenoid. 2. The ignition switch is stuck in the start position (the switch itself, not the key and tumbler) however if you were not having a problem with the ignition switch before you replaced the ...
How do i replace the key and tumbler on a 91 chevy 1500? I need to replace my key and tumbler. after removing the steering wheel i can to what looks like a dust shield but it has no visible ways to ...
...screw holding it in place. What do I need to do? It sounds as though you are talking about key tumbler in column and if you are then stick key in and turn back to acc. position should come out. ...
ive got a 1997 Chevy cheyenne 5 speed 4X4. and the ignition wont turn to the start position it will only turn backwards to accesory. im wanting to replace it. how do i go about doing that??? sounds ...
need to know how to replace ignition switch you need the key tumbler or the electrical switch itself ?
Question about 1997 C1500
...steering wheel , turn signal control and in the steering column you will find a pin that holds the tumblers in place for the key switch. You can remove the pin and then remove the key tumbler and ...
Usually answered in minutes!
584 Questions
420 Questions
403 Questions
331 Questions
284 Questions