Questions & Answers for: BMW tumbler

How to replace jammed ignition lock cylinder I had a sticky ignition cyliner and this weekend and the tumblers got completely jammed. The key goes in but doesn't turn at all. Not even one click!!! So ...

how do i start my 97 bmw if i lost the key i do not want to go throw dealer ship you can take apart the steering colum and replace the key and tumbler, but it is alot of work

...manual for your car. then you will need a steering wheel and lock plate puller.(+ new lock key tumbler set) then use your new book to walk you though the changing of your ingnition. good

1996 BMW Z3 trunk wont open with key It may be that the rod from the lock tumbler to the latch may have come loose.

I removed the original ignition tumbler and ordered a new one from BMW and it should just pop right in but it will not lock in. Any advice or suggestions. Could it be a wrong part ( they look ...

key will not come out of ignition and engine wont start the brass tumblers inside the ignition cylinder are bent causing this delimma.. Have a new lock cylinder installed to correct this problem. A ...

The key was pulled out of ignition of 2007 bmw 525xi when running how to insert the key need to remove ign barrel from steering colum and check out the tumblers for damage if damaged u will need new ...

How do I fix my 1998 E36 316i South African Edition BMW which won't switch on after the Tumbler and Tumbler Housing has been replaced with new parts and the starter motor and code box has been tested?

The Tumbler of my BMW was ordered from BMW Germany per my original Vehicle Registration. How then can the chips in the Tumbler and Key not match/mate? That would be a question for whom ever ordered it

Why doesn't the ignition key turn so I can start the bike? replaced the battery If the ignition key on your motorcycle is not turning and you're unable to start the bike, there could be a few ...