Questions & Answers for: Honda VT 1100 C3 Shadow Aero tube

Question about 2000 VT 1100 C3 Shadow Aero

2 Answers

I've taken off the front brake hose & drained my front brake caliper. After re-assembly I can't get any pressure built up in the line. When I squeeze the brake lever it's totally free/loose/floppy. ...

Ad

Question about 2001 VT 1100 C3 Shadow Aero

1 Answer

2001 vt1100 c3 aero. coolant leak from tube between cylinders. how do i repair? The tube should be sealed with 'o' rings. Remove clips from tube. Slide tube into one cylinder. Change 'o' ring for a ...

Ad

Question about 1998 VT 1100 C3 Shadow Aero

1 Answer

...coming from the drain plug or the filter......Your thoughts on that, Barry Most likely the breather tube has filled your air box with oil. If it has , you may need to replace your air filter. If you ...

Question about 1999 VT 1100 C3 Shadow Aero

2 Answers

...sometimes it is located next to the radiator cap (on models where the radiator cap is on a separate tube, not attached to the top of the radiator). There are two sensors/switches found on or near the ...

Question about 1998 VT 1100 C3 Shadow Aero

1 Answer

My 1998 Honda shadow aero is leaking coolant from the tube between the cylinder heads do u have to use the exact o rings the rings need to be correct and the torque-ing must be correct as well

can i connect each wire together or do they need to in the corect hook up? you don't have to buy a connector unless you just want to. What you DON'T want to do is just tape them together. Make sure ...

Why do I keep blowing ignition fuses? I think its because of where the fuse panal is located and it gets damp! More likely a wire has shorted inside the tubing of the frame.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...