Questions & Answers for: Chevrolet Equinox tube

Question about 2005 Equinox

2 Answers

My EGR Tube is broken in half. It makes me mad knowing that I can't get just the tube. I am not paying $177.00 for the tube and plus labor for the local dealership to put it on. A solution to this ...

Ad

Question about 2005 Equinox

1 Answer

chevy where could i get a egr tube that broken in half on my chevy equinox 2005 Emissions warranty is 5 year or 50K miles, but I assume the break was not a warranty item. Most likely will be a dealer ...

Ad

...of the red dipstick (this is the dipstick lock), and withdraw the dipstick straight out of the fill tube. Wipe the dipstick off with a clean cloth, and carefully so as not to bend it (even if it is ...

...the fill plug. There is no fill plug on transmission pans, you have to fill them from the dipstick tube in the engine bay. Get a long funnel that will fit into the dipstick tube hole, and then fill ...

Question about 2007 Equinox LS New Cars

2 Answers

...noticeable once it is driven. No leak evidence and it has been suggested I check the "gas filler tube vents". Is this a possibility? Also check your fuel pressure regulator, the fuel rail to fuel ...

Question about 2005 Equinox

3 Answers

My 2005 Equinox has a broken EGR tube, I need to get a replacement tube. Can you please get me the part number? My tube broke several years ago. The original tube is longer than the replacement. ...

Question about 2005 Equinox

3 Answers

...however, It is not unusual for transmission oil to be put in via the the transmission dip stick tube - do not confuse it with the engine oil dip stick tube. Do it slowly and make sure you dont ...

Question about 2005 Equinox

2 Answers

..."Lean Idle Air" control valve if you are getting a "lean" check engine light code. Look at the Air tube, which takes the air from the air filter body to the Throttle body, to the fuel rail. Any

Question about 2005 Equinox

1 Answer

location of a/c orifice tube the freon under pressure arrives at the fire wall passes through there, to the A/C evap. core (BOX) just before this core, is the thermal expansion valve. (aka ...

...pulley that's not turning. The the A/C compressor can also be identified because it has two metal tubes coming out of it. The two tubes are different sizes. The smaller tube is the high-pressure ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...