Question about 2003 XL 1200 C Sportster Custom
I have a tube comming out of the air filter and I have a tube coming out of the air filter and snaked through the engine towards the front forks but its not connected to anything.. Where should this ...
...fork seal leaking after 10,000 miles. The seal bushing had poor craftsmanship and scratched the tube casuing seel to leak. is this common? Not very common, but I don't see how the seal could ...
Question about 2005 FLSTC - FLSTCI Heritage Softail Classic
...There are two ways to change out the lower sliders on your bike. One, remove the entire fork tube from the steering head and the other, simply remove and replace the lower slider. There really ...
front wheel and the front fender. Take the brake calipers off. Loosen and remove the top nut on one tube. Work on one tube at the time. Loosen the pinch bolt on the lower triple tree. Slide the entire
...still leaking on left side. i was told to replace " oil seals " under the " slide tube cap " and spacer. will this work? Well, yes. The fork seals are located at the top of the ...
...and the front wheel, remove the front fender, loosen the pinch bolt screws, do not remove the tube caps, slide the fork sides downward clear of the fork brackets, repeat the procedure for the ...
...tool, remove the fork cap bolt, remove and discard the quad ring seal, carefully remove the fork tube plug from the fork tube and because it is under strong spring pressure have and maintain a
Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
gas leaking out overflow tube as soon as petcock turned on fuel running out of overflow tube,running or not as soon as turn petcock on fuel leaks out of overflow tube,lots If you are saying the fuel ...
front tire size? With a tube type laced wheel: WHEEL SIZE & POSITION = 21 in. - Front RIM SIZE & CONTOUR = T21x 2.15 TLA TUBE SIZE =Side Valve Tube MH90x21 TIRE SIZE = DUNLOP D402 MH90 - 21 ...
Question about 2006 FXSTDI Softail Deuce
how to install lower sliders on 2008 ultra classic Loosen the fork cap bolt from the fork tube plug at the top of the fork tube, but do not remove it at this time. THEN loosen the pinch bolt (with ...
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions