Questions & Answers for: trun signal

replacing rear rturn signal bulbs How do you replace the trun signal bulb on the rear driver side. You will have to remove your trunks carpeting, then you will see your turn signal hiding back there.

trun signal no op. fuse good and bulbs good turn signal does not operate. Fuse is good and light bulb is good are the turn signals not working on both sides? If yes, replace the turn signal flasher, ...

...when signals on, check for fuse in panel. there are two flasher one for the hazards and one for the trun singals, check under the dash i think the one for the trun singals is in the fuse box it will ...

...trun signal light is not burnt out nore is the rear trun signal light out I had thought it might be the reverse light because that was blown I fix that and it still kept blinking like something is ...

turn signals not working If not frt or rear try emergency flashers. Work? Trun signal switch. If none of the turn signals are working replace the flasher relay.

...trun one side on they all flash Assuming that each signal only had two wires, it sounds like you are missing a ground on the side that makes all the lights flash. With 12vdc system, when you are ...

...trun my tv on and it turns back off what can i do so it could say on You have a week signal and need to check or replace you ariel this is why your screen is black most tvs do this and auto turn off ...

...trun signal and flasher relay fuse for 1999 DODGE DURngo can't find the trun signal and flasher relay fuse for 1999 DODGE DURngo    on a fuse block attached to the main block behind ...

trun switch don't work put in new one still don't work trun switch don't work put in new one still don't work Turn signal, or trunk ? Do you have power going to the switch ?

where is the trun signal relay on a 2000 grand am? turn signals don't work at all The turn signal only has fuses. The Hazard switch is what controls the flashing part of the TS.