Questions & Answers for: truck door keypad stays lit

...and off for a couple of minutes and then goes back to showing on and you can then close the door. Happens when door is opened or closed. what happens if you plug a lamp into outlet. does it stay

...lit, press the button on ONE of the remotes only. They will ALL be programmed at this point. Now, press the learn button once more (quickly and release) and enter your number code on your keypad and ...

...Your door sensors most likely have been bumped or misaligned. Each of them has a small light that should be on when aligned. Tweak them until they are lit. What is the make and model of your

door wont close unless bi hold the wall button down. checked sensors. sending unit light stays lit but receiving sensor light isnt on. tried straight lineing them to check alignment. still now working

...door reverses it is a sensor problem. They may have been bumped. They must be pointed at one another to work properly. Each one has a small light that will be lit when they are pointed correctly. ...

...10 times it is a door sensor problem. Nothing else will cause this. Make sure the light on each sensor is lit and not flickering ever so slightly. The flickering can sometimes be difficult to

...problem with the door sensors. Make sure the small light on each sensor is lit and not flickering. Tweak them a bit. If you cannot get both lights to come on you have bad sensor or the wiring to

When we enter our code, garage door will not open. The keypad stays lit while typing in the code, but begins to repeatedly blink after code is entered. try resetting the code

...the door sensors. Make sure they are pointed at one another and the small light on each one is lit and not flickering. Tweak them a bit. If you cannot get both lights to come on you have a bad

KEYPAD ON DOOR STAYS LIT UP WITH KEYS IN HAND OUTSIDE OF THE CAR CLOSE ALL DOORS TRUNK HOOD ETC.. OBSERVE WHETHER THE DOME LIGHT CANCELS. THEN PRESS THE LAST TO BUTTONS ON THE KEYPAD SIMULTANEOUSLY . ...