Questions & Answers for: Troy-Bilt troy bilt tiller tines

troy bilt horse pto clutch will not disengage My horse III was working fine until I changed the tines. The tine lever never fully went into disengage; but, the tines would stop. Now the tines always ...

...Troy Bilt junior tiller that has the seals wore out. I could not get the tines off to replace the seals. The tines sometimes get frozen to the shaft. You might try penatrating oil and use a heat gun ...

troy bilt pony left side tine assembly fell off troy built pony left side tine assembly fell off shaft....after replacing broken bolt left side tine assembly wobbles...help sounds like the shaft is ...

...troy bilt tiller a real old one in runs good but leaks on seals at the tines The moter is about 5HP Tecumsen model # H35-58065 Ser # 8012B Trans.# 20870 I hope sombody can tell me weather its a hores ...

troy-bilt horse engiine runs good , tines work, troy-bilt horse engiine runs good , tines work, left wheel is powered But right wheel is not powered Always pulling to left. and worse getting stuck The

Troy built horse loses power when I engage tines into the dirt. What do I need to service? sounds like you are trying to till too deep raise tines up a little with the depth gauge then till the same ...

...TROY BILT 5 HP REAR TINE PONY ROTA TILLER. THE DECAL WITH THE MODEL NUMBER ETC. ON THE TINE CASING IS UNREADABLE. DO YOU HAVE ANY IDEA WHAT MODEL THIS MIGHT BE? I WOULD LIKE TO GET A MANUAL FOR IT. ...

troy bilt pony 5hp rear tine tiller is leaking behind muffler on side of motor Head bolts are probably loose, check the 3 nearest the mouffler and of course check all of them.

tines wont engage on my troy built pony. How can i fix it? tines will not turn The lever for the tines moves easily? Is there an adjustment on the linkage that may need tightening?

Troy bilt horse tiller tines turn, right wheel turns, but left wheel doesn't turn Everything works as it should except left wheel doesn't pull. without a proper model number it is guess work, but ...