Questions & Answers for: Dodge Aries trouble code 55

Ad

Question about 1987 Aries

1 Answer

...blinks five times stops and then five more what does this mean. or where can i find out that info. code 55 is the end code for the code test. In other words you have no codes stored in your

Ad

Question about 1988 Aries

1 Answer

...then a pause and 2 more blinks would mean code #32. Here is a link to the codes table: http://www.troublecodes.net/chrysler/95_25sfi.shtml These codes for a 95 2.5 should be the same for your 88. ...

Ad

Question about 1987 Aries

1 Answer

have a 87 dodge aries k car 2.2 litter what does the code series of 1 5 2 2 5 5 mean 15- vehicle speed sensor. 22- coolant temperature sensor 55 -means end of message. What's it doing?How's it running

CODE 14 Trouble Code 14 indicates that the Coolant Temperature Sensor (CTS) is reporting abnormally high readings. CTS is used to control fuel mixture, timing, idle speed, TCC and EGR operations among

Question about 1988 Aries

2 Answers

...code 55 just signals that the message is over. i hope this helps after the battery has been disconnected code 12 will appear until after 15 starts. If it persists then the battery is not keeping a ...

Question about 1988 Aries

1 Answer

...trouble codes are. To get the codes, put the key in the ignition and turn the key to the "run" position until all the dash lights come on (DO NOT START) Have your paper and pen ready to take notes. ...

Question about 1987 Aries

1 Answer

86 dodge Aries with 24 error code. Changed the tsp but still has the code and the power loss light came on again. Also has code 52(new) Car seems to go through a fair amount of gas, but that may be ...

...trouble codes with out a scanner, so lets start there turn the key on but do not crank the engine then turn key off then turn key on then turn key off and then back on ( key on-off-on-off-on ) the ...

Code 55 end of message, Forget the code worry about the condition if battery is new what about the starter, starter can be in need of replacement, then there is how the battery terminal connection?are

Question about 1987 Aries

2 Answers

trouble codes then clear them after the problem was fixed ? just disconect the battri end put the lite on and touch the +and- over 10 sec. after 10 sec plug the battry.and the emc code it desepire the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...