Questions & Answers for: Plymouth trouble code 55

Ad

Question about 1989 Reliant

1 Answer

of 2 digits. When you get flash,5 times, then flash 5 times again, that's code 55 which means end of trouble code message. have a piece of paper ready, write them down, and get back to us with results

Ad

Question about 1994 Voyager

1 Answer

...code reading trouble i tried the turn the key on and off 3 times and waited for it to start blinking for the codes. ok, so it just does short blinks 5 times then puases and blinks 5 more times. i ...

Ad

The trouble code that you gave is not a code. If it 35 its the radiator fan relay circuit. The 55 it means end of fault reading mode. Recheck code. Going to local autozone they will check it for free

...trouble codes. Write them down & get back to us. It will be 2 digits and will work like this example: 2 flashes, pause, then 2 more flashes= code 22. 3 flashes,pause then 5 more flashes would be ...

...trouble codes are 1.1 , 1.2 , 5.5 what does this mean ? If you just changed the battery, or had it disconnected, 11 will disappear next start and run, 12, is telling you that the battery has been ...

...code 12 55 on 1996 plymouth neon 12 is telling you the battery has been disconnected recently, or gone dead, and 55 is end of message. In other words, you have no trouble codes to be concerned

...trouble code with the oxygen sensor (and the reason why you failed the test,) but this is not to say that the oxygen sensor can't be bad also. Start with the cheapest thing, tracing vacuum hoses and ...

trouble code(s) it is giving. Here's how: cycle key to On (not start) position, then off, then on again, then off, then on, and leave it in the on position. (leave on after 3rd time on )  Now

Question about 1999 Grand Voyager

1 Answer

trouble code will put the trans in second gear and it won't shift. Key on-off-on-off-on without starting the engine will illuminate the check engine light .It will flash out the codes.Should see a

P0055? Code 12 means battery has been disconnected within last 50-100 starts, so controller memory has been cleared. Code 55 is "end of message"- no further codes. Looks like you have no trouble codes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...