Question about 1988 D-Series Pickups
...trouble codes they are 12 15 52 55 Can not find diagnostic codes for my 1988 Dodge D-100 truck although I have a Chiltons manual the codes are 12 15 52 55 can you help 12 Battery or computer recently ...
what does code 55 means for a dodge intrepid 1996 check engine light diagnose. CODE 55 IS DRB DISPLAY WILL BE BLANK.COMPLETION OF TROUBLE CODES DISPLAY BY MALFUNCTION INDICATOR CHECK ENGINE LIGHT.
getting codes 12 43 42 42 55 96 caravan 3.3liter getting codes 12 43 42 42 55 55 is the ending of every code so that isnt a trouble code either
trouble codes from your car you will need to either get an obd 1 reader from a local parts store or you can take it to any garage to have read. turn ignition ON-OFF-ON-OFF-ON then count the flashes of
...the light flashes twice, pauses briefly, then flashes 4 times. This problem code is 24. The end of the trouble code is 55, which is 10 flashes so you have at least 2 trouble codes on your
...you have but the earlier Chrysler products that would flash codes with key cycled on & off 3 times then left on, code 55 is end of message. In other words, no trouble codes are currently
...trouble code. There is a short pause between the flashes representing the 1st and 2nd digits of the code. Longer pauses are used to separate individual 2-digit trouble codes.An example of a flashed ...
...O2 sensor, and code 55 is telling you there are no more trouble codes stored in memory.Code 21 means the O2 sensor is not switching from rich to lean, which can be a faulty sensor or a fuel
trouble codes 12 then 55 Well those are codes, but not trouble codes. Code 12 is the start and also means there are no codes since the battery was disconnected, and 55 is the end of the test.
Question about 1996 Intrepid
...50 starts. The code 55 indicates the end of stored codes. Therefore, you have no saved trouble codes (disconnecting the battery deletes saved trouble codes). There is no DTC (P)1255 for that
Usually answered in minutes!