Questions & Answers for: trolling motor stopped working

TROLLING MOTOR We just bought a new bought and the trolling motor stops and you have to pull it out of the water and turn the prop by hand. Any ideas on what could be causing this and how much to fix.

Trolling motor will not spin with out being turned by hand. I recently purchased a Motorguide Hyperdrive (Bill Dance Modle) bow mount 36 pound of thrust trolling motor on EBAY. The prop will not spin ...

Trolling motor doens't work Was out fishing and got caught in bad rainstorm. Lifted motor up when I got to the bank to get of rain. When I returned to fishing my trolling motor stopped working shortly

trolling motor doesnt work? I was out on the water the other day trolling around i stopped for about 5 or 10 min. when went back to hit the button to move nothing happened.It just stopped working.My ...

...motor it self dose not seem to get hot just the plug,I feel I have all wires correctly connected so please give me your input on things I can try to solve this problem. Thank you, Steve if everthing ...

...motor up out of the water and step on the run button it will work. When I return it to the water their is a 50% chance it will stop working. I made sure the battery were fully charged and clead wire ...

my minn kota 70lb thrust motor is 2 years old. Brand new batteries and it will turn left & right, but the prop will not work.???? Minn kota 74 lbs. prop runs when head turns when rotating motor ...

...trolling motor stopped working suddenly. It is a 96 motorguide 56. It is completely charged. What else do I check. I check 5 fuses by the battery as well. First you need to check to see if power is ...

...trolling motor. I tried using again it would not work and will not work now.can you tell me what's wrong with it and how to fix it? Hello John, Most Of The Time I Find The Problem Is With The Cables ...

...trolling motor only works on full speed after line rapped around prop and stopped motor. fryed circut board? most likely overloaded and burned out part of the motor control circuit. so yes you are ...