Questions & Answers for: trimmer stalls pull throttle

Question about Genuine Weedeater Part # 36006-128

1 Answer

...stalls. The trimmer worked fine earlier in the season( a couple of weeks ago) Any help would be appriciated. A couple of things may work... Make sure you have the correct Oil / Fuel mixture, if it is ...

Ad

Question about Poulan/Weed Eater No. Bvm200le 711482 24cc Gas Blower/Vac

1 Answer

...stalls try another 1/2 turn (clockwise) With trigger pulled all the way in your engine should run smoothly at high revs. Try turning the screw 1/4 of a turn at a time with trigger at full throttle ...

Ad

Question about Poulan/Weed Eater No. Bvm200le 711482 24cc Gas Blower/Vac

1 Answer

...Trimmer Ser# RY34420 yesterday from home depot and I started it for the first time today to find that when the throttle trigger is pressed fully the motor stalls and turns off. Is this normal? Sounds ...

Question about 25cc Gas Line Trimmer

1 Answer

...throttle stalls. New gas and plug does not help at all. when tank gets empty it runs like a raped ape for about 20 seconds before the fuel runs out. My guess is you are getting way too much fuel. ...

Question about Troy-Bilt 4-Cycle Curve Shaft Gas String Trimmer #41ADT41C966

1 Answer

...trimmer starts okay, but will only run at a little more than an idle and stalls when I pull the throttle open or have a full open choke. Any ideas? Sounds like you will need to clean your carburetor. ...

Question about 27cc 2 Cycle Crank Straight Shaft Weedwacker Gas Trimmer ()

2 Answers

Trimmer Starts but stall out as soon as throttle is used and choke turns off. if I hold the throttle and pull the choke it runs but will stall as soon as choke is let go. Go here to retrieve a manual.

Question about 27cc 2 Cycle Crank Straight Shaft Weedwacker Gas Trimmer ()

1 Answer

...pull the choke over and put it back in the same motion it doesn't cut out. If I apply the throttle it keeps it from dying but just for a few seconds. I've tried cleaning out the carby ...

...pull the plug out and it seems to be flooded. When I can actually get it to stay running long enough to put the chock in the run position, I go to hit the throttle and sounds like it's starving for ...

...stalls as soon as the throttle is pulled I have changed the fuel lines and filter this did not change anything This is typical of fuel starvation at the carburetor. If this unit has been sitting for ...

...pull throttle full it shuts off Have to adjust the high on the carb. should have, 3 screws, 2 that are together is your h for high, and L for low. the one by itself is for idle. when mackine is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Measuring Tools & Sensors Experts

Brad Brown

Level 3 Expert

19187 Answers

Steve Pack
Steve Pack

Level 3 Expert

7126 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66854 Answers

Are you a Measuring Tools & Sensors Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...